|
HRSS-150型數顯洛氏表面洛氏硬度計
Model HRSS-150 Digital Rockwell & Superficial Rockwell hardness Tester
HRSS－150數顯洛氏表面洛氏硬度計--本機外形美觀，內部結構新穎獨特，力值傳遞準確穩定，測量精度高；初試驗力和總試驗力同步切換，操作輕捷、方便，示值重復性好，適用于各種洛氏和表面洛氏標尺的硬度測試。
該機采用大屏幕顯示，可進行標尺選擇；壓頭匹配提示：布、洛、維硬度值對照；保持時間增減；示值數據的處理、存、��；打��；照明亮度調整等多項功能，選備有RS-232計算機接口。
HRSS-150全洛氏硬度計 適用范圍：HRA、B、C、D、E、F、G、H、K和HR15N.T；30N.T；N.T標尺。
HRSS-150數顯洛氏表面洛氏硬度計 各項技術指標均符合：GB/T230.3-2002洛氏硬度計技術條件，參照ISO6508-2:1999國際標準。
HRSS-150數顯洛氏表面洛氏硬度計 適用于硬質合金，碳化物；表面淬火鋼，硬化薄板，淬鋼，調質鋼，冷硬鑄鐵，鑄鐵，鋁，銅，鎂等合金鋼。
HRSS150數顯洛氏表面洛氏硬度計 主要技術參數：
初試驗力 29.4M(3kg)，98.07N(10kg)
總試驗力 147.1N(15kg)，294.2N(30kg)，441.3N(45kg),588.4N(60kg),980.7N(100kg),1471N(150kg)
試驗力保持時間： 0-60S
試驗力加卸方式： 自動
顯示方法： 帶背光LCD屏
數據處理： CPU
其他： HR,HB,HV,HK等硬度值對照
自動打印
RS-232計算機接口
試樣最大尺寸： 工作臺面至壓頭180mm；
壓頭中心至機壁160mm
外型尺寸：（長x寬x高） (551*260*800)mm
重量： 約67Kg
使用電源： AC220V±5% 50-60Hz
HRSS-150數顯洛氏表面洛氏硬度計 主要附件： 金剛石壓頭及球壓頭各一只，工作臺3只，硬度塊HRC高、低各一塊，HRB、HRN、HRT各一塊，共5塊。
Brief Introduction
This tester a popular type Rockwell hardness testing machine with its novel appearance and unique inside structure，features high measuring accuracy, veliable performance and applicable to wide fields, it is used to for harness testing all kinds of Rockwell and Superficial Rockwell.
This tester has big screen to display, Brinell, Rockwell and Vickers for contrast. It has a lot of function such as keeping the increase and decrease of time, data dispose, storage, pick up, print and RS-232 computer output as well.
Suitable range:HRA.B.C.D.E.F.G.H.K and HR15N.T；30N.T；45N.T(scale).
All the technique index are accord with the technique condition standard of GB/T230.3-2002 Rockwell hardness tester and cosult ISO6508-2:1999 internation standard.
It serves to measure the hardness of hard metals, carburzing steels, quenching steels, hardcast irons, mild steels, A1, Cu and malleable irons.
Main Technical Parameters
Preliminary test force: 29.4M(3kg)，98.07N(10kg)
Total test force: 147.1N(15kg)，294.2N(30kg)，441.3N(45kg),588.4N(60kg),980.7N(100kg),1471N(150kg)
Test force folding time: 0-60S(can adjust)
Test force loading and neleasing methed: Automatic
Display method: Back light LCD screen
data dispose: CPU
Others: HR,HB,HV,HK ect hardness mimver for contrast
Automatic print
RS-232 computer output
Sample Max Size: working table to indenter 180mm, the center of the indenter to the arm of the machine 160mm
Coutour size(L*W*H): (551*260*800)mm
Net wekght： approx 67Kg
Power supply: AC220V±5% 50-60Hz
Main attachment： one diamond indenter and one ball indenter, three working tables.Five pieces of harness brocks:one HRC higher and one HRC Low,each a piece of HRB, HRN, HRT.
|
當前位置：
