YD200A |
儀器特點
YD200型圓度儀是一種轉臺式的通用性精密儀器。廣泛適用于科學研究和工業測量。
aaaa該儀器能測量圓度、同心度、同軸度、平面度、垂直度、軸線直線度、跳動和波度�？稍�100 到20000的放大倍率之間，任選一檔進行測量。
aaaa儀器特點：操作方便，通用性強。
aaaa配置微型計算機，可計算四種參考圓(最小區域、最小二乘、最小外接、最 大內切) 和相對各參考圓度和偏心量。運算快速可靠，并附有多種附加功能。
aaaa該儀器結構精巧，輕便易搬，維護簡單。儀器還裝有防震裝置，對操作環境要求不高，因此也適宜在車間使用。
|
|
 YD200B |
| Features: Easy operation and versatility, combined with the computer to provide fast and results. The analyzer will compute four reference circles (the minimum zone, least squares, circumscribed and inscribed ), the out-of-roundness and eccentricity value relative to any of the four references are presented both quickly and reliable. The instrument is designed with compact structure, portability and convenient maintenance. It is yet shockproof so as to suit workshops. |
 校正球 Correction sphere |
校正球
校正球?yàn)榫屑庸こ傻牟Ａ颉?br />
精度為±0.025mm。用于校驗轉臺徑向精度。 |
Correction sphere
It is a glass semisphere lapped with accuracy ±0.025mm, for verifying the radial accurcy of rotary table. |
 精密轉臺 Precision rotary table |
精密轉臺
轉臺直徑為200mm，承載工件的最大重量10kg 。轉臺下端裝有精密轉軸，其轉速為2.5 轉/秒。轉臺上相隔 90 °二個調節鈕，可調節臺面傾斜。調節范圍±2圈( ±40 ’)。 |
Precision rotary table
Its diameter is 200mm, and the max. load for part reaches 10 kg. A precision spindle is mounted on low end of the rotary table. The speed of the table is 2.5 rps. There are two knobs spaced 90° on the table. they can adjust declination for table surface. Adjustable range is ±2 rev. (approx.±40’). |
 立柱 Column |
立柱
立柱上裝有滑座，旋動升降鈕可 使滑座沿立柱作升降移動并可用鎖緊 手柄鎖緊。立柱上標有位移高度指示。
全程位移250mm 。 |
Column
The sliding bracket is installed on the column. By turning knob, the bracket can move along column up or down, also can be fixed with the lock handle. A scale which shows moving height is mounted on the column, the full displacement is 250mm. |
 傳感器 Pick-up
|
傳感器
傳感器是旁測式電感傳感器�？纱怪被蛩桨惭b。測桿可在測量面內容易地轉位到某一位置，裝上限位裝置可測斷續表面。 |
Pick-up
This is a side-measuring electroinduction pick-up. It can be mounted vertically or horizontally. In order to measure various shape, the stylus arm can be turned to certain position on measured surface easily. After mounting stylus stop attachment interrupted surface can be measured. |
記錄器 Recorder(YD200A) |
記錄器
被測工件的輪廓和相應的參考圓記錄在直徑為150mm 的火花記錄紙上。圓形記錄寬度為40mm 。記錄紙 的驅動和主軸同步。 |
Recorder
The profile of measured part and relative reference circle are recorded on the polar Chart in diameter 150mm. The width of the recording zone is 40mm. The chart rotation is synchronous with spindle. |
|
技術參數
Technical data
|
|
測量范圍高度 Measuring capacity
高度：250mm
Height
外徑：180mm
External diameter
轉臺載荷：10Kg
Table load
內徑：3-180mm
Internal diameter
偏載：15Kg.mm
Max. offset load
測量系統
當倍率補償位置1.0 倍時記錄值與真 實值之間的誤差不超過±5 ％，量值±1 ％量程。
System accuracy:
When multiple rate compensation keeps 1.0, the error between recording and true values less than ±5% of displacement of stylus tip ±1% measuring range.
轉臺精度
按ISO 最小區域法
0.1μm±0.0005m/mm ×H ( H 為測 量面離臺面的高度<mm>)。
Spindle accuracy:
ISO roundness error 0.1μm+0.0005 μm/mm H. ( H--Height above tilt turntable ). Radial distance between two concentric circles comprising indicated from true roundness.
|
傳感器
測桿最大安置轉角： 80°( 在測量面內)
測量范圍 0.4mm ( 使用60mm 長度測桿)
測端的測力：可變0.02-0.08N
Pick-up:
Stylus arm positional range:
80° ( in the measuring plane )
Measuring range:
0.4mm ( 60mm stylus arm )
Force of stylus tip:
varies with 0.02-0.08N
電子部件
徑向放大倍率(使用60mm 長度測桿時)：
×100 ，×200 ，×400 ，×1000 ，
×2000 ，×4000 ，×10000 ，
×20000
濾波器通帶：
1-500 ，1-150 ，1-50 ，1-15 ，
15-500
波度/每周
極坐標記錄器： 轉速2.5 轉/分
記錄紙直徑：150mm
徑向記錄范圍： 40mm
Electronic device:
Diametral magnification using 60mm
stylus arm:
×100，×200，×400，
×1000，×2000，×4000，
×10000，×20000
Filter transmission polar chart:
1-500，1-150，1-50，1-15，15-500
undulations/rev.
Recorder:2.5rev/min
Paper diameter:150mm
Diametral range:40mm |
當前位置：
